Filling and emptying systems

Drum, IBC and Container Filling and Emptying Systems

The comprehensive range of Filling Systems available from Kanon Liquid Handling Ltd includes both Gravimetric and Volumetric systems which variator types are available to suit the rquired application.

Our latest addition to the range is a Robotic Filling system which negates the need for Operator interaction during the filling process, thereby freeing operators for other duties and protecting them from contact with potentially hazardous substances

semi or fully automatic

Filling Systems can either be semi or fully automatic and can be designed to operate in both safe and hazardous environments covering a wide range of containers. A comprehensive selection of accessories, inculding overfill protection, can be added to provide a total bespoke solution. Systems can be Weights and Measures approved.

ARTICULATED ARM FILLING SYSTEM

This type of system is similar to the Pivoted Arm type but features an additional pivot point in the centre of the Frame to allow the Frame to fold back upon itself to create two arcs of operation across the top of the containers being filled. The Lance, which can be Bottom Fill if required, is fixed to the end of the outer section of the Frame.

Pivoting Arm Filling System

A relatively simple system that uses a combination of Stainless Steel tube and high quality Kanon Swivel Joints to provide a working envelope across the Pallet of Containers being filled.

The design is somewhat similar to a miniature Tanker Loading Arm. The Lance is usually incorporated in the end of the Arm and can feature a pneumatically operated foot valve in the tip of the Lance if required.

‘XYZ’ Axis Filling System

The main difference with this type of system is that the Frame to which the Lance is mounted is not pivoted onto the Mast but instead is mounted onto an additional Frame installed across the rear of the working area.

The Lance Frame can slide in a Left/Right direction across the Rear Frame to allow the entire footprint of containers to be covered. Front to Rear coverage of the working envelope is provided by sliding the Lance backwards or forwards along the Lance Frame in a similar way to a Pivoted Arm type of system.

An advantage of this system is that the need for any clearance outside of the footprint of the containers, into which the Filling Lance needs to swing, is eliminated completely.

Robotic Arm Filling System

The absolute ultimate in Filling Systems. With this system a Pallet of containers, or an IBC, is transferred to the filling point automatically.

Once the Containers are in position, the Robotic Arm removes the Bungs from the containers, fills the containers and then replaces the Bungs in them. Once all the containers have been filled, the Pallet or IBC is transferred automatically to a point where it can be picked up by a Fork Lift Truck.

The Robotic Arm system eliminates the need for any operator interaction during the actual filling operation and is particularly suited to the filling of hazardous or toxic products where operator exposure must be kept to a minimum or eliminated completely.