SWIVEL JOINTS

Swivel joints have been used in the processing industry for a long time. The use of swivel joints in metal loading arms became critical because of the extraordinarily high bending and axial load combination, due to the reach of the loading arm and wind forces. KANON swivel joints are developed to withstand all these loads without leaking. In fact, leakage and regular maintenance is something which is unknown with KANON swivel joints By using KANON swivel joints it is possible to make all kinds of flexible connections using rigid pipes instead of using hoses.

Materials
  • Carbon steel
  • Low Temperature Carbon Steel
  • Stainless steel
  • Carbon Steel with PTFE, rubber and other linings
  • Hastelloy
  • Titanium
  • Plastics
  • Temperature range of -200°C up to 300°C
  • Pressure range up to 120 bar
  • Sizes from 1” up to 24”.
Features
  • Swivel joints can withstand much higher loads than conventional designs due to the special shape of the ball races in combination with relatively large diameter ball bearings
  • The ball race chamber is completely separated from the sealing part
  • The product seal can be replaced without removing the ball bearings
  • Swivel joints are provided with long life lubrication, so there is no need for regular maintenance
  • Double or single ball race depending on application
  • Jacketing and trace heating option
  • Full size bore
  • Tell tale leakage indicator
Purposes
  • SAN831 Multi Purpose, up to 4”
  • SAN812 Multi Purpose, from 6” up to 24”
  • SAC817 for Cryogenic Purposes
  • SRL825 for Corrosive Purposes (PTFE lined execution)
  • SRS822 for Toxic Purposes
  • SAL835 Low Height Execution